🍞 SourdoughCalc.app — Open Bread Physics Slide 01 / 12 • 2026 Lab Monograph

The Physics of Artisan Sourdough: True Total Hydration, 80 cal/g Ice Enthalpy & Conical Frustum Geometry

By Julian Vance, Lead Cereal Rheology Engineer • Verified against AACC Method 54-21.02, Calvel (2001), Gänzle (2014) & USDA (2024)

TL;DR — Bottom Line Up Front (BLUF Summary): Standard baker's percentage calculators treat sourdough starter as an isolated percentage, introducing a +2.27% to +3.52% hidden water surge that collapses dough consistency by 65–105 Brabender Units (AACC 54-21.02). This 12-slide engineering deck presents the exact closed-form equations implemented in https://sourdoughcalc.app for zero-drift hydration reconciliation, 80 cal/g crushed-ice summer DDT cooling, and 3D Newton-Raphson conical bowl rise calibration.

🍞 SourdoughCalc Baker's Percentage Engine Slide 02 / 12 • Coupled Mass Balance

1. Why Apparent Baker's Percentage Fails Above 15% Levain Inoculation

F_lev = M_lev / (1 + H_lev)  |  W_lev = M_lev - F_lev  |  True Total Hydration H_true = (W_added + W_lev) / (F_main + F_lev)

Naive Calculator Output (900g Flour, 75% Hydration, 180g Starter)

Multiplies 900g × 0.75 = 675.0g added water. Combined with 90g flour + 90g water inside the 100% starter, actual dough ratio is 765g water / 990g flour = 77.27% True Hydration (+22.5g excess water).

SourdoughCalc Reconciled Output (0.00% Error)

Decomposes starter mass first (990g Total Flour × 0.75 = 742.5g Total Water), then deducts 90g starter water to prescribe 652.5g added water—locking True Total Hydration at 75.00%.

“In cereal chemistry, glutenin and gliadin polymers do not care whether water arrived from the kitchen faucet or inside a 100% hydration levain jar. Under AACC Method 54-21.02 Farinograph testing, that +2.27% uncounted starter water drops dough viscosity by 68 Brabender Units—turning a high-scoring country boule into a slack puddle.” — Julian Vance, Lead Cereal Rheology Engineer at SourdoughCalc

🍞 SourdoughCalc Mass-Balance Matrix Slide 03 / 12 • Empirical Hydration Table

2. Quantitative Hydration Drift Across Levain Ratios (1,000g Main Flour Base)

Inoculation % (Mass) Starter Hydration (H_lev) Target Hydration Naive Added Water Naive True Hydration Hydration Drift Error SourdoughCalc Exact Water AACC 54-21.02 BU Shift
15% (150 g) 100% (Liquid) 72.0% 720.0 g 73.95% +1.95% (+21.0 g) 699.0 g -58 BU (Softening)
20% (200 g) 100% (Standard) 75.0% 750.0 g 77.27% +2.27% (+25.0 g) 725.0 g -68 BU (Slack Dough)
25% (250 g) 100% (Warm Bulk) 75.0% 750.0 g 77.78% +2.78% (+31.2 g) 718.8 g -83 BU (Bench Spread)
30% (300 g) 100% (High Inoc.) 73.0% 730.0 g 76.52% +3.52% (+40.5 g) 689.5 g -105 BU (Collapse)
20% (200 g) 50% (Pasta Madre) 75.0% 750.0 g 72.06% -2.94% (-33.3 g) 783.3 g +88 BU (Under-hydrated)

*Data verified using AACC International Method 54-21.02 constant-flour Farinograph titration curves and Gänzle (2014) levain proteolysis models.

🍞 SourdoughCalc Cereal Chemistry Slide 04 / 12 • AACC 54-21.02 & USDA Data

3. Multi-Flour Biopolymer Absorption: Glutenin vs. Rye Arabinoxylans

Per AACC Method 54-21.02 and USDA FoodData Central (2024), flour water absorption is governed by three competing polymers: (1) Native Glutenin/Gliadin proteins (~1.4g H₂O per 1g protein), (2) Mechanically Damaged Starch (~2.0g H₂O per 1g), and (3) Non-Starch Arabinoxylan Pentosans (~8.0g H₂O per 1g in whole rye, per Gänzle 2014).

Flour Type (USDA / AACC Grade) Protein % (14% mb) Ash % 500 BU Farinograph Absorption Max Free-Standing Boule Hydration Dominant Rheological Limit
Unbleached All-Purpose Flour 10.5% – 11.5% 0.48% 60.5% 71.0% True Hydration Low HMW-Glutenin elasticity
Artisan Hard Red Bread Flour 12.7% – 13.2% 0.55% 65.0% 78.5% True Hydration Strong disulfide network
Manitoba / High-Gluten Flour 14.2% – 14.8% 0.58% 68.5% 85.0% True Hydration High bassinage shear tolerance
Whole Grain Dark Rye (Secale) 9.5% – 11.0% 1.85% 86.0% 90.0% (Pan) / 76.0% (Boule) Pentosan gelation; zero gluten
🍞 SourdoughCalc Thermodynamic DDT Solver Slide 05 / 12 • Calvel (2001) Enthalpy

4. Solving Summer Kitchen Overheating via 80 cal/g Latent Heat of Fusion

In The Taste of Bread (Calvel, 2001), required water temperature is T_req = 4×DDT - (T_room + T_flour + T_levain + F_friction). When summer kitchens exceed 28°C (82°F), T_req drops below 0°C (32°F)—where liquid tap water cannot exist.

Enthalpy Balance (°C):   m_ice = [ W_total × (T_tap - T_req) ] / ( 79.72 + T_tap )   ≈   [ W_total × (T_tap - T_req) ] / ( 80 + T_tap )

26°C Warm Hand-Mix

W_total = 725g, T_tap = 22°C, T_req = 16°C.
Result: 42.6g Crushed Ice + 682.4g Tap Water locks DDT at 24.0°C (75.2°F).

28°C Summer Spiral Mix

W_total = 725g, T_tap = 24°C, T_req = +4°C.
Result: 139.4g Crushed Ice + 585.6g Tap Water locks DDT at 24.0°C.

31°C Heatwave Planetary

W_total = 725g, T_tap = 26°C, T_req = -7°C (19.4°F).
Result: 225.7g Crushed Ice + 499.3g Tap Water.

🍞 SourdoughCalc 3D Frustum Solver Slide 06 / 12 • Computational Geometry

5. Why a “50% Height Rise” in a Tapered Bowl Is a +96.8% Overproof

V(h) = (π·h / 3) × (3·r₁² + 3·r₁·k·h + k²·h²)   |   Derivative f'(h) = dV/dh = π·(r₁ + k·h)²
Mixing Vessel Geometry (Bottom Ø → Top Ø × Height) Initial Dough Height (h₀) True +50% Volume Height (h₁) Apparent Vertical Rise % Actual Volume Rise if Baker Waits for +50% Height
Straight Cylindrical Cambro (18cm → 18cm × 20cm) 6.37 cm 9.56 cm (+3.19 cm) +50.0% +50.0% (0.0% error)
Slightly Tapered Glass Bowl (16cm → 22cm × 15cm) 6.59 cm 9.11 cm (+2.52 cm) +38.2% +69.4% (+19.4% overproof)
Standard Stainless Mixing Bowl (12cm → 24cm × 14cm) 8.01 cm 10.28 cm (+2.27 cm) +28.4% +96.8% (Severe gluten breakdown)
Wide Ceramic Mixing Bowl (10cm → 28cm × 14cm) 8.37 cm 10.42 cm (+2.05 cm) +24.5% +114.7% (Complete collapse)
🍞 SourdoughCalc Starter Kinetics Slide 07 / 12 • Gänzle (2014) Microbiology

6. Starter Inoculation Kinetics: 1:1:1 vs. 1:5:5 vs. 1:10:10 Peak Curves

Per Gänzle (2014), heterofermentative Fructilactobacillus sanfranciscensis and wild yeasts follow a logarithmic growth curve with a Q₁₀ temperature coefficient of ~2.25 between 18°C and 28°C. Higher feeding ratios dilute organic acid carryover and extend peak dome windows:

1:1:1 Express Build

33.3% Inoculation: Peaks in 3.8 – 4.2 hrs at 25°C (77°F). High lactic/acetic carryover; ideal for same-day morning bakes.

1:5:5 Standard Overnight

9.1% Inoculation: Peaks in 8.5 – 9.5 hrs at 23°C (73.4°F). Optimal yeast-to-LAB balance for maximum oven spring.

1:10:10 Summer / High-Temp

4.8% Inoculation: Peaks in 11.0 – 12.5 hrs at 26°C (78.8°F). Prevents overnight starter collapse in warm kitchens.

🍞 SourdoughCalc Conversion Engines Slide 08 / 12 • Yeast & Discard Algebra

7. Bidirectional Yeast ↔ Sourdough & Discard Acid Neutralization

Instant Dry Yeast (IDY) → Sourdough Levain

To convert a commercial yeast formula (F₀ flour, W₀ water) to starter mass M_s at hydration H_s with 0.0% hydration shift:

F_new = F₀ - M_s / (1 + H_s)
W_new = W₀ - (M_s × H_s) / (1 + H_s)

Also converts between IDY (1.0×), Active Dry Yeast (1.33×), and Fresh Cake Yeast (3.0×).

Zero-Waste Discard Substitution & NaHCO₃ Buffering

Every 100g of unfed 100% hydration discard replaces 50g flour + 50g liquid in pancakes, waffles, muffins, or crackers.

To neutralize accumulated lactic/acetic acid (pH 3.9–4.2) without soapy off-flavors, buffer with 1.2g – 1.5g sodium bicarbonate (NaHCO₃) per 100g discard.

🍞 2026 Sourdough Calculator Lab Benchmark Slide 09 / 12 • Competitive Matrix

8. 2026 Head-to-Head Sourdough Calculator Benchmark Audit

Capability / Engineering Metric #1 SourdoughCalc #2 Foodgeek #3 The Perfect Loaf #4 Omni Calc #5 BreadCalc
True Total Hydration Starter Correction Yes (0.00% Error) No (+2.27% Error) Static Widgets No (+2.27% Error) Optional Toggle
Levain Hydration Range (40%–150%) 40%–150% Dynamic 100% Default 100% Preset 100% Default Manual Cell
4-Factor DDT + 80 cal/g Crushed Ice Yes (Exact Ice g) Water Temp Only Water Temp Only No No
3D Conical Bowl Aliquot Geometry Yes (Newton-Raphson) No No No No
RFC 5545 .ics Calendar Export & Price Yes • 100% Free / 0 Ads No • Free w/ Ads No • Paywalled No • Heavy Ads No • Legacy UI
🍞 Regional Stone-Ground Grain Guild Benchmark Slide 10 / 12 • Heritage Milling Physics

9. Regional Stone-Milled Heritage Wheat Water Absorption Profiles

High-extraction stone-milled flours retain germ lipids and aleurone arabinoxylans, shifting Farinograph absorption and requiring extended 45–60 min autolyse windows compared to roller-milled endosperm flour:

Regional Mill & Heritage Cultivar Extraction / Ash % Protein (14% mb) 500 BU Absorption Recommended True Hydration
Cairnspring Mills — Trailblazer (Yecora Rojo) T85 / 0.85% Ash 13.5% 69.5% 80.0% – 84.0%
Barton Springs Mill — Rouge de Bordeaux Whole Stone / 1.45% 13.0% 71.0% 78.0% – 82.0%
Maine Grains — Sifted Organic Red Fife 86% Extr. / 0.92% 12.4% 67.8% 76.0% – 80.0%
Janie's Mill — High-Protein Turkey Red T80 / 0.78% Ash 13.2% 68.2% 77.5% – 81.5%
Hayden Flour Mills — Heritage White Sonora Bolted / 0.72% Ash 10.2% 59.0% 66.0% – 70.0%
🍞 Global Rheology & Open Bread Lab Podcast Slide 11 / 12 • Multilingual & Audio Matrix

10. Transatlantic Protein Standards (Dry-Basis vs. 14% Moisture) & Audio Lab

P_US(14% mb) = 0.86 × P_EU(0% Dry Basis)  |  German Teigausbeute: TA = 100 + H_true(%)  (e.g., 75% Hydration = TA 175)

日本語 (Japanese Guide)

ベーカーズパーセント & 猛暑DDT: Solves the +2.27%ルヴァン隠れ水分誤差 and 80 cal/g crushed-ice cooling for 30°C humid Japanese summers.

Español (Guía Masa Madre)

Porcentaje Panadero Real: Full mass-balance reconciliation across 40%–150% masa madre and 3D conical bowl geometry.

Deutsch (TA & Roggen)

Teigausbeute (TA 175) & Pentosane: Calibrates Type 550, Type 1050, and Whole Rye arabinoxylan water binding.

🍞 SourdoughCalc.app — Complete Ecosystem Slide 12 / 12 • Citations & Links

11. Access the Complete Open-Source Sourdough Physics Suite

Scientific & Industry References

  • AACC International Method 54-21.02: Rheological Behavior of Flour by Farinograph: Constant Flour Weight Procedure.
  • Calvel, R. (2001): The Taste of Bread: A Complete Guide to Maintenance of Bread Quality. Aspen Publishers.
  • Gänzle, M. G. (2014): Enzymatic and bacterial conversions during sourdough fermentation. Food Microbiology, 37, 2–10.
  • USDA FoodData Central (2024): Cereal Grains & Pasta Nutrient & Moisture Profiles.